12V 4S 200A BMS Max 200A 3.2V LifePo4 Lithium Iron Phosphate Protection Board 24V High Current Inverter BMS PCM Motorcycle car
12V 4S 200A BMS Max 200A 3.2V LifePo4 Lithium Iron Phosphate Protection Board 24V High Current Inverter BMS PCM Motorcycle car
12V 4S 200A BMS Max 200A 3.2V LifePo4 Lithium Iron Phosphate Protection Board 24V High Current Inverter BMS PCM Motorcycle car
12V 4S 200A BMS Max 200A 3.2V LifePo4 Lithium Iron Phosphate Protection Board 24V High Current Inverter BMS PCM Motorcycle car

12V 4S 200A BMS Max 200A 3.2V LifePo4 Lithium Iron Phosphate Protection Board 24V High Current Inverter BMS PCM Motorcycle car


Sale price
  • -29%
  • Regular price $198.00

    Special discount:

    If you buy batteries from our store, our BMS will offer you a special discount of 20%.


    Daly 3.2V LifePo4 4S 12.8V 80A 100A 200A 18650 PCM battery protection board BMS with balanced lithium battery module

    Model: DL8S (3.2V Rated LiFePO4 Battery bms not for 3.7V rated Li-ION Battery bms)

    common Version : common port for charge/discharge 

    separate Version : separate port for charge/discharge

    We can customize any PCB from 1S to 30S lithium batteries with different current.


    1. Overview

    DL8S24V80A/100A/200A PCB is used for 8 series 24V lifepo4 battery pack.

    We can design it for various lithium batteries like LiFepo4, LiMn2O4, and Li-polymer etc.

    The main functions are: over charge protection, over discharge protection, over current protection, short-circuit protection, temperature protection etc.

    According to the customer request we can develop PCM in different sizes and structures.

    BMS manufactured by  high quality Mos and IC imported . Keep your battery long cycle serivce life time.


    2. Advantage

    ◆Use top quality (A-level) protective integrated circuit IC, from the solution of Seiko of Japan.

    ◆Strong load ability, constant discharge current 80A/100A/200A, use high voltage resistance, low inner resistance power Mosfet. The heat sink will greatly help cooling.

    ◆IC itself has power balancing function. The circuit is simple and reliable.

    ◆Typical voltage detection for each cell. So each battery will be prevented over charged or over discharged. Over current and short circuit protection function is very reliable.Long time short circuit of the load won’t affect the PCB and the battery.Temperature protection during charging and discharging.

    ◆Extreme low power consumption. The consumption of the whole device is less than 50uA.

    ◆PCB use high anti-corrosion, high water resistance, high impedance ESD conformal Coating


    Product Summary:

     Adopt foreign premium IC in class A protection.

     Use Infineon MOSFET And professional high current trace design and process to withstand large current surge.

     Complete overcharge, over discharge, over current, short circuit function.


    Engine starting battery, electric bicycle/motorcycle/scooter, golf trolley/carts, power tools...

    Solar and wind power system, RV, caravan...

    Back-up system and UPS...

    Torch LED light emergency light.

    HTB18Ts4a8Cw3KVjSZFlq6AJkFXajHTB1PX7xrZuYBuNkSmRyq6AA3pXaEHTB1yRsMbVqZBuNjt_jqq6ymzpXa0HTB1wAs4a8Kw3KVjSZFOq6yrDVXaMHTB1YLE7aW1s3KVjSZFAq6x_ZXXarHTB1Uw7_cBWD3KVjSZFsq6AqkpXaE (1)

    HTB10CXhAv9TBuNjy0Fcq6zeiFXa1HTB1fQQ4a8Cw3KVjSZFlq6AJkFXa8 (1)

    1.What is the common port and separate port? what is the difference?

    We take 13S48V16A BMS as an example, common port 16A means your charge cathode and discharge cathode are connected in the same point end(our P-), charge cathode and discharge cathode are used in the common connection 

    port, so the charge current and discharge current are the same 16A. while the separate port is separately connected by charge cathode (C-) and discharge cathode (P-),  so the charge current and discharge current are different, discharge current 16A, charge current 8A.


    2.What is the balance function?

    The working principle and function are as followings, when your one cell voltage is upto alarm voltage(Li-ion upto 4.18V, Life Po4 upto (3.6V), then the cell Balance starts to work, balance resistance starts discharge with 35ma(when balance discharge starts to work, BMS will starts a little heat up, which is the normal reflection), the cell is in both charging and discharging status, and others which are not reached to alarm voltage(Li-ion 4.18V, Life Po43.6V)are only in charging status, no discharging, when the fast cell voltage is reached to alarm voltage(Li-ion 4.25V, Life Po43.75V)BMS starts off power protection, all the other cells 

    are all in stop of charging, this process will enable your battery charging in balance current, and your battery voltage are in balance status, but when your cell voltage difference are in a big range, then balance can not be functionning.



    3.The relationship between Battery capacity and BMS current?

    There is no direct relationship between  Battery capacity and BMS current, big capacity doesn`t mean a big battery, but rely on continue current, that is to say if your engine is powerful, your should choose high current of BMS, it is not relied on battery capacity.


    4. What type of charger should  I choose?

    Lithium battery must choose specific charger, do not use Charger for Leadacid battery, for leadacid charger may have MOS with high pressure breakdown protection, which will not protect of BMS over charge.Life Po4 battery charger voltage=battery string No.X3.6V, while Li-ion battery charger voltage=Battery string No.X4.2V.


    5. What current BMS should I choose ?

    Take 10S36V as an example: what current BMS you choose is relied on your E-bicycle Motor power and current limitation of controller. eg., choose 16A for below 350W, 25A for below500W, 35A for below 800W, 60A for Below 1000W, higher than 1200W are contact with our service specialist for suggestions, one inall, continue current shall be higher than current limitation in Controller.


    6. Whether my BMS damaged?

    if you want to judge if the BMS is damaged, please take the folowing steps, to test if each cell voltage is the same with voltmeter? if the cell voltage difference is over 1.0V, the fault is displayed that it cannot run far, no power supply at the 

    start range, short charge time, all these issues are almost caused by battery cells, if BMS damaged is displyed as no charge, no discharge, no discharge while the battery has voltage.



    One-stop solution, Lithium / LiFePo4 battery packs, accept customized, OEM sevices,

    We will respond within 1 business day or less.

    Anyone who is open dispute without contact us , no warranty! add blacklist .

    No matter what problems is , we can slove them,  Any questions please contact us first !


    About Prices :

    Dear Customers,if you wanna to be our long business partner,you can share your email box,whatapps,skype ,facebook etc.



    1. we usually send out battery by international commercial express, UPS ,FedEx ;but now battery belong to some dangerous goods in some countries , so we send them by special line.

    2. It takes 8-15 days by express send to destination ( not including the Lead Time ) ,if send by special line may takes more than 25 days. 

     3. Battery goods belong to sensitive items , we produce the best battery , so welcome customer come to our warehouse.


    About Customs duties & taxes :  

    EU Member Countries,Custom duties and custom clearance expenses are included.

    Canada,United States,RussianFederation,Thailand,Singapore,

    Vietnam,Taiwan,Malaysia,Philippines.Custom duties and custom clearance expenses are included.

    Other countries dos not include Customs duties & taxes.

    If you have any questions, please contact us online.


    Before taking the order:

    Please read carefully all the description before taking orders, the battery is suitable for DIY lovers with experience, people who are not familiar with electronic, please go to our shop to buy the finished product. 

    Those buyers who buy this battery, must agree that you are familiar with the safe use of lithium battery knowledge. 



    DIY battery pack must get the cells balanced (same voltage ) before assembly. Later if there happens don't know how to assembled or unbalanced assembly is not accepted refund. please consider before taking orders, place order means you have agreed. thank you for your cooperation!


    DIY assembled battery note: 

    Professionals will detected voltage/resistance/appearance and other issues before every shipment, we can only ensure that the single battery is good, when arrival you can test the cells within 2-3 days, after that means batteries have no problem, does not provide return nor refund. If you found problems you can contact us for return or refund. Battery can only be unused (the electrode intact, no welding, no wear, the appearance good) to provide return. Any return behavior buyers need to be responsible for shipping fee.


    These situations not provide return nor refund:

    1: after the assembly or assembly process happen any problem, such as the protection board connected to the wrong wire burned lead to battery damage, charger failure, the assembly error or unbalanced assembly, etc.


    2: For damage caused , such as battery bulge/ welded, battery pack without protection BMS caused by charging. 

    Tip: These products are batteries only, without protection board, you need to purchase a match one! You can check our shop and search BMS. 


    Courier and logistics

    In addition, because the battery is prohibited product, many courier and logistics are unable to send, the arrival will indeed be slower, so please wait patiently after place an order. Can Not give us bad feedback due to the courier company or because of the courier service slow or other factors.  open dispute will be unacceptable. 

    Sorry for any inconvenience.